Minicom Advanced Systems IP Control Guide de l'utilisateur télécharger pdf (Page 11)

USER GUIDE

10.

Pre-installation instructions

Place cables away from fluorescent lights, air conditioners and other machines that

are likely to generate electrical noise.

Switch off the computer and disconnect the keyboard monitor and mouse.

Connecting the IP Extender to the host computer/KVM

switch

Connect the host computer / KVM switch to the IP Extender as follows:

1. Connect the connectors of one end of the 3 in 1 CPU cable to the

Computer/Switch KVM ports of the IP Extender.

2. Connect the connectors of other end of the 3 in 1 CPU cable to the KVM ports of

the host computer / KVM switch.

3. Connect the power cord and Ethernet and/or modem, ISDN connection.

4. You can connect a local KVM console to the IP Extender and work on the host

computer. Figure 5 and Figure 6 illustrate the connections to a computer and

KVM switch respectively.

POWER

85-265VAC 50/60 Hz

USER COMPUTER / SWITCH

ETHERNET

ISDN

www. minicom.com

SERIAL 1 SERIAL 2

P110

Smart IP Extender

3in1CPUcable

Computer

Figure 5 IP Extender connections to a computer

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

Pas de commentaire

Minicom Advanced Systems IP Control Guide de l'utilisateur Page 11