Minicom Advanced Systems IP Control Guide de l'utilisateur télécharger pdf (Page 24)

SMART IP ACCESS

1. Locate and install the firmware file.

2. Click

. The upgrade starts. On completion, click

to return to the main menu.

Note

When KVM.net Manager is selected, all firmware upgrades are launched from the

KVM.net Manager.

Note!

Firmware upgrade erases all User settings, KVM switch setting, mouse and video

adjustments and RS232 settings. The units network settings remain intact.

23. Restore Factory Settings

From the menu select Restore Factory Settings. The Restore Factory Settings

page appears see Figure 17.

Click

to restore the original Smart IP Access parameters, resetting

all the information added by user: Network settings, Servers, Switches, Users,

Passwords etc.

Warning! Once reset the data cannot be retrieved.

Note: When KVM.net is managing IP Access the data can be retrieved.

Figure 17 Restore factory settings

24. Log Out

Click to exit the configuration menu and close the session. Note that

only one Administrator can log into the configuration area at a time. An idle

timeout of 30 minutes terminates the session.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Pas de commentaire

Minicom Advanced Systems IP Control Guide de l'utilisateur Page 24