Minicom Advanced Systems IP Control Guide de l'utilisateur télécharger pdf (Page 33)

USER GUIDE

2. Wait until the unit finishes booting (1-2 minutes).

3. You need to know the IP address of the IP Control. The IP address depends on

whether there is a DHCP server on the network. If there is, the DHCP server

assigns an IP address to the IP Control. If there is no DHCP server, the unit

boots with the static IP address 192.168.2.155. See Figure 31 for an overview of

this procedure.

Figure 31 Safe mode procedure

Open Internet Explorer and type the following into the Address box: http://IP

address/config. (Do not start the address with https). The Login page appears,

see Figure 32.

Figure 32 Login page

4. Type username: admin , password: SAFEmode. (Case sensitive). (This

username and password works only in Safe mode). A menu appears, see Figure

33.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

Pas de commentaire

Minicom Advanced Systems IP Control Guide de l'utilisateur Page 33