Minicom Advanced Systems Smart IP Extender Guide de l'utilisateur télécharger pdf (Page 33)

USER GUIDE

2. Ensure that the host computer/KVM switch is connected to IP Link and switched

on during the firmware update.

3. Locate and upload the file from the client computer to IP Link. In case of any

errors the upload will be aborted.

After a smooth upload the Update Firmware panel appears showing the currently

firmware version number and the uploaded firmware version number.

4. Press

. The firmware uploads. Warning! This process is

irreversible; ensure the IP Link's power supply won't be interrupted during the

update process, as this may cause damage.

5. When prompted, reset IP Link manually by pressing

. When

pressed all connections to the administration or Remote console close. 30

seconds later, IP Link runs with the new firmware. You must login again.

Attention: Only experienced staff members or administrators should perform a

firmware update.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 42 43

Pas de commentaire

Minicom Advanced Systems Smart IP Extender Guide de l'utilisateur Page 33