Minicom Advanced Systems DX System Manuel d'utilisateur télécharger pdf (Page 58)

DX SY

STEM

4. From the list of servers on the left, highlight the desired servers/devices and

press . To add all servers (without highlighting), press

. The servers transfer to the right and are included in the scan

group.

To remove servers from the scan group: Highlight the desired server and press

. To remove all servers (without highlighting), press .

5. Use the and arrows to change the order of the servers

in the scan group.

6. Click OK. The Scan box reappears.

7. Set the scan time. Check Auto skip to automatically skip unconnected servers.

Check Infinite Loop to make the scan un-ending.

8. Select the group to scan.

9. Press Scan, the scan activates.

10. To exit scan, press Esc.

15. Adjusting the picture quality

Where the picture quality is unsatisfactory, you can adjust the picture quality of

each computer.

To do so:

1. In Servers window, click once on the desired computer’s icon.

2. From the Action menu select Video Tuning. The selected computer’s screen

appears.

3. Use the keyboard Up, Down and Left, Right Arrow keys to adjust the picture.

4. When the picture is satisfactory, press Esc. The Servers window reappears.

5. Apply the changes to the tuned computer or to all the servers connected to the

device.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 71 72

Pas de commentaire

Minicom Advanced Systems DX System Manuel d'utilisateur Page 58