Minicom Advanced Systems 3000 Guide de l'utilisateur télécharger pdf (Page 26)

DS VISION 3000

Figure 29 Manually displayed topology

3. To define the units connected to the ports, click the checkbox of a port or a

number of ports that have the same device connected.

4. Click . A drop-down menu appears.

5. Select the device type. Note! When the device is a Line Splitter, repeat the

process of defining the connected devices for each port of the Line Splitter.

Naming a port

To give a port an identifying name:

1. Check the port number (ensure that no other ports are checked). In the manual

section, Set device name: appears.

2. Type a new name for the port - You can give ports identical names. This name

appears immediately on the left.

Saving a topology

To save a topology choose File/Save or Save as. Save the topology.

To restore the topology choose File/Restore. Find the saved topology and click

Open. The stored topology appears. Note! The most recent saved topologies appear

in the File menu.

Saving a Group

You can save a Group to include particular ports. Once defined, you can send

instructions to the defined Group without needing to choose the individual ports.

To save a Group:

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Pas de commentaire

Minicom Advanced Systems 3000 Guide de l'utilisateur Page 26